Turbosound Milan M12 aktivna zvučna kutija

The Milan M12 is a portable 12” two-way powered loudspeaker featuring two independent input channels,  mic and line inputs, two band EQ, intelligent limiting, and a Mix Out function  for connection to additional Milan loudspeakers for easy system expansion.

The Class-D amplifier is a true 2-channel unit with an integrated electronic crossover, allowing the HF and LF drivers to be powered separately without one being able to influence the sound of the other.
Total output power is 1,100 watts peak, providing plenty of headroom to maintain good dynamic range so that transient signals are delivered effortlessly.
The lightweight switch-mode power supply coupled with industry leading Klark Teknik digital signal processing, providing dynamic equalisation and sophisticated limiting functions to ensure optimum performance and long term reliability.

The two discrete input channels are each equipped with balanced, combination jack/XLR connectors and a level control, catering for a range of music sources from low impedance microphones, acoustic guitars and keyboards to mp3 players and mixing consoles, selectable via a mic/line slide switch.

Common to both channels are bass and treble controls with ±6dB of cut or boost to allow the loudspeaker to be equalised to the venue. In addition, a low cut filter is provided at 100Hz to shelve the low frequency response when used on the floor as a wedge monitor, or to ensure correct integration with subwoofers.
A speech/music switch optimises the loudspeaker’s frequency response either for predominantly vocal material or for music programme.
A Mix Out function sends the mix of both input channels post-EQ to additional Milan loudspeakers on a balanced male XLR for easy system expansion.

The trapezoidal enclosure is fabricated from high density polypropylene, and is extensively ribbed externally and internally to eliminate resonances and also to provide an attractive and durable cabinet finish.
The symmetrical 43° side angles allow the loudspeaker to be conveniently used as a floor monitor.
A recessed grab handle on the top is designed for easy lifting and carrying, while the dual angle pole mount socket allows the loudspeaker to be mounted on straight poles or speaker stands either vertically, or raise higher and angled down to optimise audience coverage.
A total of six M10 rigging points are provided on the top and bottom of the cabinet to enable vertical or horizontal suspension in permanent installations using M10 shoulder eyebolts.

Mains power is connected via a non-locking IEC with integrated fuseholder. The illuminated front badge can operate in one of three possible modes: permanently on; permanently off; or to indicate the action of limiting.

• 1,100 watt 2-way loudspeaker
• Efficient Class-D amplifier
• Roadworthy, lightweight cabinet
• Aluminium carrying handles
• Two discrete mic/line input channels
• KLARK TEKNIK signal processor
• Speech/music contour
• Converging Elliptical Waveguide
• Dual angle pole mount
• Internal M10 rigging points
• Illuminated front logo